Wall panel
Caracteristics
Due to the high strength of the material, the panel is only 10 mm thick and weighs 20 kg/m². The panels are exceptionally strong, ensuring their durability.
Through structural analysis and technical design of the panels and their fixing systems, structures can be efficiently optimised at an early stage of the project.
The material’s properties allow panels to be manufactured in a variety of shapes, textures and colours, without being constrained by the material’s inherent characteristics. A standard product range is available to reduce production lead times.
The material is non-combustible and suitable for use in interior applications where fire safety is required. It does not contribute to flame spread and helps maintain a safe indoor environment.
Standard dimensions
Custom size
Maximum dimensions
Colors
Finishes
Installation
1. Surface preparation
Make sure the substrate is clean, dry, level and free from dust and grease.
Apply the tile adhesive to the installation surface using a notched trowel.
2. Adhesive application
Apply a suitable cement-based or polymer adhesive evenly using a notched trowel.
3. Panel placement
Carefully position the panel onto the adhesive and press firmly to ensure full contact.
4. Alignment and joints
Adjust the panel alignment and maintain consistent joint spacing between panels.
5. Finishing
Allow the adhesive to cure, then fill joints if required and clean the surface.
Make sure the substrate is clean, dry, level and free from dust and grease.
Apply the tile adhesive to the installation surface using a notched trowel.
2. Adhesive application
Apply a suitable cement-based or polymer adhesive evenly using a notched trowel.
3. Panel placement
Carefully position the panel onto the adhesive and press firmly to ensure full contact.
4. Alignment and joints
Adjust the panel alignment and maintain consistent joint spacing between panels.
5. Finishing
Allow the adhesive to cure, then fill joints if required and clean the surface.
1. Surface preparation
Ensure the wall is clean, level, and structurally sound.
2. Rail installation
Fix vertical or horizontal metal rails securely to the wall using appropriate anchors.
3. Alignment setup
Check rail alignment and spacing to ensure accurate panel positioning.
4. Panel mounting
Attach panels to the rails using mechanical fasteners or hidden fixing systems.
5. Final adjustment
Align joints, secure all connections, and inspect the installation.
Ensure the wall is clean, level, and structurally sound.
2. Rail installation
Fix vertical or horizontal metal rails securely to the wall using appropriate anchors.
3. Alignment setup
Check rail alignment and spacing to ensure accurate panel positioning.
4. Panel mounting
Attach panels to the rails using mechanical fasteners or hidden fixing systems.
5. Final adjustment
Align joints, secure all connections, and inspect the installation.
Let’s get started on our first project together!
Just fill in the short form and we’ll get in touch.
